Reina Bot: Commands

Reina first lists what it will make, you press Confirm, and it makes only what is missing: #mod-alerts, a private alert channel for moderators, inside a private category called Security; the Quarantine role and the #verify gate; a trap channel that catches spam bots; the #report-scams guide; and every safe setting the check-up can change. Running it again makes nothing twice.

Slash command, in a server. Discord shows it as: Set up Reina's security in one go: alert channel, #verify gate, trap channel, safe settings

How to

1. In any channel type /security and pick setup from the list, then press Enter.
2. Read the list of what Reina will make. Under it are three or four menus. The first picks the alert layout: All in one channel (the default), Organized by kind, or Organized, with a kick and ban log. The second picks the guide channels: just #report-scams (the default), all three, or None. The third picks the trap channel: make one (the default) or None. With None, Reina makes none of those channels and says how to add them later: /security reports all:True for the guides, /security trap for the trap channel.
3. The fourth menu is one of two. If members can post in a rules, announcements or welcome channel that was there before Reina, it offers Make them read-only (the default is Leave their permissions as they are), and the list above names those channels. Otherwise it is the gate timer: whether to kick members who never answer the gate question, and after how long; the list above says what it is set to now (Never until you change it). When the read-only offer is shown, set the gate timer afterward with /security verify kick_after:.
4. Press Confirm. Only you can press it, within 5 minutes.
5. Reina reports each step as it goes (step 1 of 5, step 2 of 5, and so on; fewer when you picked None, one more when you picked an organized layout), then says what it made.
6. Optional: type /security mods and pick your moderator role so those members can press Reina's buttons.

Example: /security setup

Good to know

• This is the security part alone. To set up channels, roles, a theme and rules as well, run /setup: it includes this step.
• Reina changes nothing on your channels unless you pick it. Leaving the fourth menu alone keeps every permission on your rules, announcements and welcome channels as it is. If you pick Make them read-only, members can read and react but not post, moderators and Reina can still post, and /security undo puts it back.
• Changed your mind within 7 days? /security undo puts the safety settings back, and /security undo everything:True also deletes the channels and role that setup made. It lists them and asks first.
• You can rename any channel or role setup made, and Reina still knows what it is, because it remembers ids, not names. The trap channel is the one exception to leave alone: Reina gives it a new name every day on purpose.
• The trap channel stays outside Reina's categories on purpose, because it has to look like a normal chat channel to a spam bot.
• The alert channels are private: only moderators and staff roles can see them.
• If an alert channel you already have can be read by people who are not moderators, the list says so and names everyone who would lose access. Confirm makes it private: hidden from everyone else, open to your moderator roles (Manage Messages, Kick Members, Ban Members or Manage Server, or added with /security mods) and Reina. A bot's own role keeps its setting, and a role you shut out there stays shut out. /security undo puts back the permissions it changed.
• If one step fails, Reina says so and carries on with the next one.

All in one channel sends every alert to one channel. Organized by kind makes a private category called Security with #mod-joins, #mod-held and #mod-reports, and moves the alert channel into it for the server's own alerts; Organized, with a kick and ban log also makes #mod-log. An organized layout shows a preview and a Confirm button first.

Slash command, in a server. Discord shows it as: Choose where Reina posts security alerts: one channel, or a channel for each kind

How to

1. In any channel type /security and pick alerts, then press Enter.
2. Either fill in channel to send everything to one existing channel, or pick a layout, or both.
3. For an organized layout, read the preview and press Confirm within 5 minutes. Only you can press it.
4. Going back to All in one channel keeps the channels Reina made, but they get nothing new. To delete them, run /security remove and pick Organized alert channels for part. (/security undo everything:True also works within 7 days of making them.)

Example: /security alerts layout:Organized by kind

Good to know

• If you give neither a channel nor a layout, Reina explains both ways. All in one channel with no channel given needs an alert channel to be set already.
• Giving only a channel while an organized layout is on changes the server alerts channel; new members, held messages and reports keep going to their own channels until you pick All in one channel.
• Reina must be able to View Channel, Send Messages and Embed Links in the channel you pick: Edit Channel > Permissions > Reina.

Slash command, in a server. Discord shows it as: Add or remove a moderator role for Reina's security buttons (run again to remove)

How to

1. In any channel type /security and pick mods, then press Enter.
2. In role pick your moderator role, then press Enter. Reina says whether it added or removed the role.

Example: /security mods role:@Moderators

Good to know

• A moderator role lets its members press Approve, No action needed, the held-message and report buttons, Send a reminder, and use /security verdict and /security remind.
• Kick and Ban always need the real Kick Members and Ban Members permissions. A role can never grant them through Reina.

It also shows the gate timer, how many spam filters are on with the strikes ladder, and the blacklist (how many people, what happens when one joins, whether it is shared). Only you see the reply.

Slash command, in a server. Discord shows it as: Show the channels, roles and switches Reina's security uses here

How to

1. In any channel type /security and pick settings, then press Enter.
2. Read the list. A line that says something is not set ends with the command to run.

Example: /security settings

A permission is put back only if nobody has changed it since. With everything:True it also deletes the channels and role that /security setup made. It lists them first, warns that a deleted channel loses its messages for good, and waits for your Confirm.

Slash command, in a server. Discord shows it as: Put back the safety settings the last /security setup or Fix it for me changed

How to

1. In any channel type /security and pick undo, then press Enter. To remove what setup made as well, set everything to True.
2. Read the list. If it names things to delete, press the red Confirm button. Only you can press it.

Example: /security undo everything:True

Good to know

• It only works within 7 days of the change.
• Without everything:True nothing is ever deleted.
• To turn one part off later than 7 days, or any time, use /security remove.

Reina deletes a channel only if it made it and nobody has used it since. A channel you pointed Reina at is never deleted: Reina deletes the one post it pinned there, puts back the topic, slowmode, category and Quarantine permission it changed, and stops watching it. It shows a preview first, takes a backup before deleting anything, and waits for your Confirm. The alert channel is never removed.

Slash command, in a server. Discord shows it as: Turn one security part off: deletes only what Reina made, sets back channels that are yours

How to

1. In any channel type /security and pick remove, then press Enter.
2. In part pick Trap channel, Guide channels, Gate and Quarantine role, or Organized alert channels, then press Enter.
3. Read the preview. It lists what Reina deletes (in red), what it sets back and leaves in place, and what it keeps because it was used or because Reina does not know whether it made it.
4. Press Confirm within 5 minutes. Only you can press it.
5. To set the part up again, run the command named at the end of the reply: /security trap, /security reports, /security verify or /security alerts.

Example: /security remove part:Trap channel

Good to know

• A channel is kept, not deleted, when someone other than Reina posted in it recently, when it holds a post whose wording you set with Apps > Edit this text, when it is an organized alert channel that holds any alert, or when a category still holds a channel that is not deleted. A role is kept when anyone has it. To delete a kept channel yourself, right-click it > Delete Channel.
• On a trap channel you chose, the Quarantine role stays unable to see it while the gate exists, so nobody in quarantine can post there.
• If the Quarantine role sits at or above Reina's role, Reina cannot delete it and says so. Fix: Server Settings > Roles, drag Reina above it, then run /security remove again.
• It waits while a /setup build, a design change or a /backup restore is running. Run it again when that is done.
• Gate and Quarantine role is refused while any member is in quarantine. Decide on them first with Approve, Kick or Ban on their alerts, or in Server Settings > Members, then run /security remove again.
• A channel from before Reina kept track of what it made is turned off but never deleted, because Reina does not know whether it made it.
• A channel that is also the alert channel is left alone. Pick another alert channel first with /security alerts channel:, then run /security remove again.
• A deleted channel can come back with /backup restore (its layout and permissions, never its messages).

A Fix it for me button changes the safe ones for you after you confirm. About once a week Reina also posts the check-up in the alert channel if something needs attention.

Slash command, in a server. Discord shows it as: Check this server's safety settings, with a Fix it for me button

How to

1. In any channel type /security and pick checkup, then press Enter.
2. Read the list. Every line that needs attention ends with where to fix it.
3. To let Reina change the safe settings, press Fix it for me, read the preview, and press Confirm.
4. Changed your mind? Type /security undo within 7 days.

Example: /security checkup

Good to know

• It also checks that only moderators can read your alert channels. If anyone else can, the line names the channel and who can read it, and Fix it for me makes it private: hidden from everyone else, open to your moderator roles and Reina. If your alerts go to a channel made for everyone (the gate, the trap or a guide), it says so instead: make a channel only moderators can see, then run /security alerts channel: and pick it.
• It also looks inside each channel for permissions that give members powers they probably should not have there: Manage Channels, Manage Roles, Manage Webhooks, Manage Messages, Manage Threads, Manage Events, Mention @everyone, and Move, Mute or Deafen Members, allowed to @everyone or to a role that is not a moderator role. If it finds any, the line names the channel and the role, and a Channel permissions button appears under the check-up. Fix it for me does not touch these.
• Channel permissions: only you, with Manage Server, can open it. It numbers each case with the Discord click path to fix it by hand. Pick cases in the menu, then press Fix the picked ones, or Fix all. A fix sets the permission back to the middle (gray) option, so the role has only what it has everywhere else, and /security undo takes it back for 7 days. Leave the picked ones tells Reina to stop naming them, in the check-up and in the permission watch, unless that role gains more powers there, and the permission watch alert then says it was left as it is. Reina needs Manage Roles, and to see the channel: Server Settings > Roles > Reina, and Edit Channel > Permissions > Reina. Discord only lets Reina change permissions it has itself, so a case such as Mention @everyone or Manage Webhooks says so and shows only the by-hand path; Reina never gives itself a permission to get around that.

The editor has ready-made lists (swearing, sexual content, slurs), your own words, blocked sites, a switch for invites to other servers, and the channels and roles AutoMod skips. It reads the rules from Discord every time you open it, so it always shows what is really there. Only you see it.

Slash command, in a server. Discord shows it as: Edit what Discord's AutoMod blocks here: ready-made lists, your words, invites, sites

How to

1. In any channel type /security and pick wordfilter, then press Enter. The command has no options: everything is in the message that opens.
2. Ready-made lists: tick swearing, sexual content or slurs in the first menu. Untick all of them to switch the list off.
3. Edit your words: press the button, type one word or phrase per line (up to 1000 lines of 60 characters), and press Submit. A star at the start or end matches more: *cat* also matches scatter. An empty box switches your words off.
4. Edit blocked sites: press the button and type one site per line, like example.com. Any link to it is blocked.
5. Block invites: press the button to switch invite links to other Discord servers on or off.
6. Channels to skip (up to 25) and Roles to skip (up to 20): pick the places and people AutoMod leaves alone for your words and blocked links.
7. The editor closes after 14 minutes with no press. Run /security wordfilter again to open it again.

Example: /security wordfilter

Good to know

• Reina makes two rules of its own, Reina: your words and Reina: blocked links, and uses the one ready-made list rule, Reina: flagged words. It never deletes a rule: emptying a list switches the rule off. A switched-off rule keeps its words in Discord: the editor shows how many, says it is switched off, and fills the box with them, so the next edit starts from them and switches the rule on again. Allow lists and patterns set in Server Settings stay as they are.
• When invites are blocked, your own server's invite links are blocked too, except the vanity link. Let moderators post invites by adding their role under Roles to skip.
• Discord allows 6 word rules in a server. If yours has them all, Reina says so and you delete one you no longer use: Server Settings > Safety Setup > AutoMod.
• If a rule Reina made is deleted in Server Settings, the editor says so when you open it and starts a new rule the next time you save.
• There is no undo. Edit it again here, or change it in Discord: Server Settings > Safety Setup > AutoMod.
• Reina stores only the ids of its two rules. The words themselves live in Discord.

With False, only suspicious accounts are held.

Slash command, in a server. Discord shows it as: Strict gate: every newcomer answers the #verify question, not only suspicious ones

How to

1. In any channel type /security and pick strict, then press Enter.
2. Set on to True or False and press Enter.

Example: /security strict on:True

Options you leave out stay as they are. With none set, the reply only shows the three switches.

Slash command, in a server. Discord shows it as: Choose which scam picture lists I use here: this server's own, the shared one, and sending to it

How to

1. In any channel type /security and pick images, then press Enter.
2. To see where you stand, press Enter with nothing set. Reina answers with the three switches, one plain sentence each.
3. Set local, global or send to True or False and press Enter. Reina says Saved and shows the three again.
4. Local list: True deletes pictures your moderators confirmed here as scams and puts the poster in quarantine. False stops checking.
5. Shared list: True alerts your moderators when a picture matches one another server confirmed and the people who run Reina Bot approved. Reina never removes a message or holds anyone for it. False turns it off.
6. Sending: True sends the pictures your moderators confirm to the people who run Reina Bot for review. The shared list and its review never record which server sent them or who posted them. While your local list is on, it keeps its own copy of each fingerprint and who posted it; with it off, Reina keeps no copy of a picture it sends. False stops sending.

Example: /security images global:True

Good to know

• The shared list starts off, and so does sending. The local list starts on.
• Login QR codes (the kind that log someone into a Discord account) are always checked and deleted, whatever these switches say.
• A match on the shared list only alerts your moderators. The alert shows the matching picture hidden until clicked, and has Kick, Ban, No action needed and Not a scam. Not a scam tells the people who run Reina Bot the match is wrong; it needs the Manage Messages permission or a moderator role.
• Reina sends only pictures a moderator confirmed as a scam. A reporter's screenshot is never sent.
• If sending is on but the shared list is not open in your server yet, the reply says so, and nothing is sent.
• To stop sending, run /security images send:False. What is kept about a picture that was already sent is on the Privacy page.

It is a level, never a percentage, and the moderators decide. Only you see the reply.

Slash command, in a server. Discord shows it as: Show Reina's read on one member: risk level and what to do

How to

1. In any channel type /security and pick verdict, then press Enter.
2. In user pick the member, then press Enter.

Example: /security verdict user:@NewAccount

Good to know

• If the member was banned in a linked server, the reply says so as a fact. It never changes the risk level.
• If the member is on this server's blacklist, the reply says so, with the reason and the date.

With this server's own list on, the pictures also join it at once. Only you see Reina's reply.

Message menu, in a server.

How to

1. Right-click the message that has the scam picture (press and hold on mobile).
2. Pick Apps, then Send picture to Reina.
3. Reina says how many pictures went for review and how many were already waiting or already on the shared list.

Example: Right-click a message > Apps > Send picture to Reina

Good to know

• Only the pictures go. The shared list and its review never record which server sent them or who posted them. With your local list on, the pictures also join it, and it keeps who posted them, as it always does.
• If sending is off, Reina says so. A server manager turns it on with /security images send:True.
• A server can send up to 10 pictures an hour. A forwarded message is refused: right-click the original message instead.
• On one of Reina's own alerts, press Remove, Kick, Ban or Quarantine instead: with sending on, Reina sends the pictures that alert confirmed, never a reporter's screenshot.

Buttons and commands still work. Good for the first week.

Slash command, in a server. Discord shows it as: Dry run: Reina alerts, but holds, deletes, pauses and locks nothing on its own

How to

1. In any channel type /security and pick dryrun, then press Enter.
2. Set on to True to start a dry run, or False to stop it. The alert channel is told either way.

Example: /security dryrun on:True

Good to know

• A dry run never stops the deletion of posts in guide channels.

/security setup already does the first part with a default question. The optional kick_after setting is the gate timer: whether Reina kicks members who never answer, and after how long.

Slash command, in a server. Discord shows it as: Create the Quarantine role and the #verify gate, and set the question newcomers answer

How to

1. In any channel type /security and pick verify, then press Enter.
2. In question type what held newcomers see, and in answer type the right answer. Capital letters, spaces and lookalike letters are ignored.
3. To use a channel you already have as the gate instead of making #verify, also fill in channel. Reina pins the question there and leaves who can see it as you set it.
4. Optional: in kick_after pick Never (the default, they wait for a moderator), or After 1, 3, 7, 14 or 30 days. Leave it out to keep the timer as it is. /security settings shows it.
5. To change only the gate timer once the gate is set up, fill in kick_after alone: /security verify kick_after:After 7 days. Reina saves the timer and changes nothing else: the question, the answer and the pinned post stay as they are.
6. Drag the Reina role above the Quarantine role: Server Settings > Roles.

Example: /security verify question:What is 7 plus 3? Type the number. answer:10 kick_after:After 7 days

Good to know

• The gate timer kicks only a member whose own answer would have let them in, once the days you picked have passed since they were held. It never kicks a high-score join or anyone held by the blacklist or by strikes (those wait for a moderator), staff, the server owner, or anyone at or above Reina's role. It does nothing during a lockdown or while the server has no gate channel (nobody could answer then), and in a dry run it only says who it would kick. Time Reina Bot was offline counts toward the days.
• Reina kicks at most 20 members at a time and looks at each one again right before the kick, so a member a moderator approved, or who answered, in the meantime stays. It posts one alert in the join alerts naming them, and once a kick worked it closes their own alerts with a line saying why. The kicked members can join again and are judged fresh. Reina needs Kick Members: Server Settings > Roles > Reina. When you save a timer without it, the reply says so with that click path. If it is missing, or Discord refuses anyway (Reina's role below theirs, or a server that asks moderators for 2FA when the bot's owner has none), the alert says what to do and Reina tries again the next day.
• Turn it off with kick_after:Never. Reina kicks no one for waiting unless you turned this on.
• Running it with question and answer posts and pins the question again, so fill them in only to change them. Without a gate yet, kick_after alone is refused with the command that sets the gate up first.
• To turn the gate off later, run /security remove and pick Gate and Quarantine role for part. It is refused while anyone is in quarantine.
• Reina never uses a channel that already has a job (an alert, trap or guide channel) or one Discord itself uses (system messages, rules or community updates) as the gate.

Its pinned message and topic start with DO NOT POST IN THIS CHANNEL. A bot that posts there has the message deleted and is held.

Slash command, in a server. Discord shows it as: Create a trap channel: spam bots that post in it are quarantined

How to

1. In any channel type /security and pick trap, then press Enter.
2. Reina says where the channel is. Leave it where it is: moving it into a category with a guide or alert channels would make it look different.
3. To use a channel you already have instead of a new one, fill in channel. Everyone must be able to see it (Edit Channel > Permissions > @everyone > View Channel on), it must not be in the Security or Guides category, and nobody but Reina may have posted in it (the trap deletes every post there, so make a new empty channel: right-click a category > Create Channel). Reina sets its topic, pins the warning, and never renames it.

Example: /security trap

Good to know

• To turn the trap off later, run /security remove and pick Trap channel for part. A channel Reina made is deleted unless it was used since; a channel you chose is left in place with its topic put back.

When you press Confirm, Reina sends each of them one short direct message saying where to go and what to press, and tells you how many it reached. It skips anyone reminded in the last 24 hours. Never automatic.

Slash command, in a server. Discord shows it as: DM the members still waiting at the gate a reminder to answer the question (asks you first)

How to

1. In any channel type /security and pick remind, then press Enter.
2. Read how many members are waiting.
3. Press Confirm to send the reminders.

Example: /security remind

Good to know

• Running it again reaches the rest, because each run cuts at 100 members.
• A reminder never kicks anyone. Kicking members who never answer is a separate setting, off unless you turn it on: /security verify kick_after:.

Shared ban notes about them that this server made are removed too, and so is any blacklist entry about them in this server.

Slash command, in a server. Discord shows it as: Delete what Reina logged about one user in this server

How to

1. In any channel type /security and pick forget, then press Enter.
2. In user pick the person, or paste their user id if they have left.
3. Reina says how many records it deleted.

Example: /security forget user:@SomeoneWhoLeft

Good to know

• It does not undo a ban, a kick or a role.

Slash command, in a server. Discord shows it as: Lock the server down: slowmode, verification High, DMs and invites paused

How to

1. In any channel type /security and pick lockdown, then press Enter.
2. Optional: in minutes type how long, from 5 to 1440. Leave it out for 60.
3. To end it early, type /security unlock or press the Unlock button on the alert.

Example: /security lockdown minutes:30

Slash command, in a server. Discord shows it as: End the lockdown and put back what Reina changed

How to

1. In any channel type /security and pick unlock, then press Enter.

Example: /security unlock

A confirmed raid ban is also shared with linked servers.

Slash command, in a server. Discord shows it as: Ban recent high-scoring joins, after a preview and your Confirm

How to

1. In any channel type /security and pick raidban, then press Enter.
2. In min_score type the lowest join score to include (10 to 1000), and in lookback_minutes how far back to look (30 to 1440).
3. Read the list of accounts, then press Confirm. Only you can press it.

Example: /security raidban min_score:40 lookback_minutes:60

Run it again with the same bot to remove the trust. Every change is posted to the moderators.

Slash command, in a server. Discord shows it as: Owner only: trust a bot (or person) the anti-nuke watcher never contains (run again to remove)

How to

1. In any channel type /security and pick trust, then press Enter.
2. In bot pick the bot or person, then press Enter.

Example: /security trust bot:@OtherModBot

With all set to True it also makes #if-you-were-scammed and #new-here. All guide channels sit in a category called Guides, with the longest slowmode Discord allows (6 hours).

Slash command, in a server. Discord shows it as: Create or refresh the read-only #report-scams guide channel (and, if you ask, two more guides)

How to

1. In any channel type /security and pick reports, then press Enter. Set all to True for all three guide channels.
2. Reina says which channels it made or refreshed. Everyone can read them and nobody but Reina can post.
3. To use a channel you already have as the report guide, make it read-only first (Edit Channel > Permissions > @everyone > Send Messages off), then fill in channel. Nobody but Reina may have posted in it, because a guide deletes every other post.

Example: /security reports all:True

Good to know

• To take the guides away later, run /security remove and pick Guide channels for part.
• Guide channels that already exist are refreshed either way: their pinned guide, slowmode and place under Guides. An older #report-scams outside every category is moved under Guides.

What leaves a server: only when a moderator bans someone with Reina's Ban button or a confirmed raid ban, the person's user id, that they were banned, one reason word, and when. What comes in: nothing until that person joins, then one alert for the moderators that says where and when, as a fact and never a score. Bans made any other way are never shared.

Slash command, in a server. Discord shows it as: Owner only: link with another server so each sees the other's bans when that person joins

How to

1. Owner of server A: type /security and pick share, set action to Make a pairing code, and press Enter. The code works once, for 30 minutes.
2. Send the code to the owner of server B. They type /security share in their server, set action to Enter a code, paste the code, and press Enter.
3. They see both server names and press Confirm. Reina sends a direct message to the owner of server A with Approve and Decline.
4. The owner of server A presses Approve. If the message did not arrive, type /security share with action List linked servers and answer there.
5. To stop sharing, either owner or anyone with Manage Server picks action Unlink a server and chooses the server.

Example: /security share action:Make a pairing code

Good to know

• A server can link with up to 10 others by default. Linking never imports older bans.
• A shared ban note is removed after 90 days, when that server unbans the person, when either side unlinks, and when the person uses /privacy.
• Deleting a note never undoes a ban. To appeal, the person asks that server's moderators.
• A link is also what lets two servers share their blacklists, but that stays off until the owner of each server turns it on: /blacklist shared.

Pick them in user, or paste their user id in user_id if they are not in the server (they can be on the list before they ever join). Add a short reason in reason, up to 100 characters, if you like. From then on, the moment they join, Reina does what the server's blacklist action says: keeps them out, puts them in quarantine or bans them. Only you see the reply.

Slash command, in a server. Discord shows it as: Put someone on the blacklist (they can be on it before they ever join)

How to

1. Optional: switch on Developer Mode (User Settings > Advanced), then right-click the person > Copy User ID.
2. In any channel type /blacklist and pick add, then press Enter.
3. In user pick the person, or leave user empty and paste their id in user_id.
4. Optional: in reason type a note for your moderators, such as scam links in another server.
5. Press Enter. Reina says what happens when they join and when the entry ends.

Example: /blacklist add user_id:123456789012345678 reason:scam links

Good to know

• The entry acts on the next join. If the person is in the server right now, nothing happens to them: use Kick or Ban for that (right-click the member).
• Adding someone who is already listed keeps the new reason and starts the timer again.
• Quarantine needs the Quarantine role, and every blacklist action is said in the alert channel. If this server has neither yet, the reply says so: run /security setup first. Until then a listed person who joins is not held, and /security verdict on them notes that they joined while listed.
• Reina refuses yourself, a bot, the server owner, anyone who is a moderator here, and anyone whose top role is at or above yours. Each refusal says what to do next.
• An entry ends by itself after 180 days unless you change it with /blacklist settings (30 to 730 days). Take someone off sooner with /blacklist remove.
• The reason is shown to this server's moderators and, if you share the blacklist (/blacklist shared), to the linked servers that share back. It is never written into Discord's audit log, and Reina never sends the person a direct message.

Removing never unbans: if they are banned, Reina says so and you unban them by hand.

Slash command, in a server. Discord shows it as: Take someone off the blacklist

How to

1. In any channel type /blacklist and pick remove, then press Enter.
2. In user pick the person, or paste their user id in user_id, then press Enter.
3. If Reina says they are still banned, unban them: Server Settings > Bans, then Revoke Ban.

Example: /blacklist remove user_id:123456789012345678

Good to know

• If the person is not on the list, Reina says so and points at /blacklist list.
• If they are waiting in quarantine because of the blacklist, removing them lets the gate answer work for them again. When they answer, their blacklist alert closes as handled, unless a linked server's shared blacklist still names them.

If you share the blacklist, it also lists what linked servers share with you. Only you see the reply.

Slash command, in a server. Discord shows it as: Show the blacklist, newest first, plus what linked servers share with you

How to

1. In any channel type /blacklist and pick list, then press Enter.
2. Read the list. A long list has Previous and Next buttons under the message, for 10 minutes. Only you can press them.

Example: /blacklist list

Good to know

• An empty list says so and names /blacklist add.
• Lines from linked servers show the server's name, the reason and the date. They are a note or an action depending on /blacklist shared.

Off (the default): nothing leaves this server and nothing comes in. Alert only: a linked server's entries are a note for your moderators when that person joins, never an action. Act: a linked server's entries work here like your own. Entries flow only between servers that are linked with /security share and that both turned this on.

Slash command, in a server. Discord shows it as: Share the blacklist with the servers linked to this one, or stop

How to

1. Link the two servers first, if you have not: /security share (see Linked servers).
2. In any channel type /blacklist and pick shared, then press Enter.
3. In mode pick Off, Alert only or Act, then press Enter. Turning it on takes the owner.
4. Reina says what leaves this server: for each entry, the user id, the reason note, the date it was added and this server's name. Every linked server's alert channel is told when you change it.

Example: /blacklist shared mode:Alert only

Good to know

• Only the owner can turn sharing on, because entries then leave the server. Turning it off, or down to Alert only, is safe, so Manage Server is enough.
• With Alert only, the moderators get a note with the usual member buttons (Kick, Ban and No action needed), and the join goes on as usual.
• Unlinking with /security share stops everything at once. Entries end by themselves, and /security forget and /privacy delete:True remove them.
• Each server keeps its own list. Nothing a linked server shares is copied into your list.

With none set, the reply only shows the settings. The actions: Keep out (kick them; they can come back and are kicked again), Quarantine (the default: the Quarantine role, and only a moderator letting them in frees them), or Ban.

Slash command, in a server. Discord shows it as: What happens when a blacklisted person joins, and how long an entry lasts

How to

1. In any channel type /blacklist and pick settings, then press Enter.
2. In action pick Keep out, Quarantine or Ban. In days type how long an entry lasts, from 30 to 730 (180 until you change it).
3. Press Enter. Reina says Saved and shows how many people are on the list, the action, the days and the sharing mode.

Example: /blacklist settings action:Ban days:365

Good to know

• A change applies to the people already on the list too, from their next join. Days apply to entries added afterward.
• Reina needs the permission the action uses: Kick Members, Manage Roles or Ban Members. The reply says which one is missing and where to turn it on: Server Settings > Roles > Reina. The setting is saved anyway.
• If Reina cannot do the action when a listed person joins (a missing permission, a moderator, or someone above Reina's role), they are treated like any other newcomer: the gate still holds them when every newcomer answers it, and a suspicious account is still held. The alert says the action failed, says when they are in quarantine, and has the buttons to decide.
• Quarantine needs the Quarantine role: /security verify makes it.
• A dry run (/security dryrun) only says what Reina would have done when a listed person joins.

A message that trips a filter is deleted, the channel gets a short notice, the moderators get one alert, and the hit counts as a strike (see /security strikes). Options you leave out stay as they are. With none set, the reply only shows the filters.

Slash command, in a server. Discord shows it as: Spam filters AutoMod cannot do: floods, image spam, emoji walls, empty lines, glitch text

How to

1. In any channel type /security and pick filters, then press Enter.
2. To see where you stand, press Enter with nothing set. Reina answers with one line per filter.
3. Set a number to change a limit, and 0 to turn that filter off: flood is messages in 5 seconds, images and stickers are per 10 seconds, emoji and lines are per message, caps is the percent of capital letters in a message of 12 letters or more, length is characters per message, spoilers is spoiler tags per message. Set glitch to True or False.
4. To leave a channel out of the filters, pick it in skip_channel. Run it again with the same channel to filter it again.

Example: /security filters flood:8 caps:70 skip_channel:#memes

Good to know

• Starting settings: floods more than 6 messages in 5 seconds, more than 4 posts with pictures in 10 seconds, more than 12 emoji, more than 15 line breaks, and glitch text are on. Caps, length, spoilers and stickers are off.
• One post counts once for the picture limit, however many pictures it has, so sharing a set of screenshots in one post is never a burst. Inside a code block (between ``` marks) only empty lines beyond 2 in a row count, so a pasted log or code, blank lines between its parts included, is not a wall of empty lines, but a pile of empty lines wrapped in a code block still is.
• The filters run for every member who is not staff, trusted members and boosters included, because a flood is a flood. They skip Reina's own channels, the trap and gate channels, and the channels you skip.
• A flood deletes the whole burst, not just the last message.
• The picture limit here is about bursts. It has nothing to do with the scam picture lists in /security images.
• Reina keeps only counts and times, in memory. The database gets one log line per hit with the name of the filter and no text.
• If Reina lacks Manage Messages, it still counts, alerts and adds strikes, but deletes nothing, and the reply tells you to turn it on: Server Settings > Roles > Reina.
• A dry run (/security dryrun) deletes nothing and counts no strike. It only alerts.

Each step has a number of strikes: warn, quarantine, timeout and kick, with 0 meaning that step is off. Reina takes the most severe step that has been reached. A strike stops counting after a number of hours. Options you leave out stay as they are. With none set, the reply only shows the ladder.

Slash command, in a server. Discord shows it as: What happens as spam filter hits add up: warn, quarantine, time out or kick

How to

1. In any channel type /security and pick strikes, then press Enter.
2. Press Enter with nothing set to see the ladder, how long a strike counts, and the warning text.
3. Set warn_at, hold_at, timeout_at or kick_at to the strike count for that step (0 turns it off). Set timeout_minutes for how long a timeout lasts and decay_hours for how long a strike counts.
4. Optional: in notice type your own warning text. {member} and {n} are filled in. Type default to get Reina's wording back.

Example: /security strikes warn_at:3 hold_at:6 decay_hours:48

Good to know

• Starting ladder: warn at 2 strikes and quarantine at 4. Timeout and kick are off. A strike counts for 24 hours.
• The timeout step needs Timeout Members, which Reina's invite does not ask for. Until you give it, that step warns instead and the reply says so. To give it: Server Settings > Roles > Reina > Timeout Members. Or time the member out by hand: right-click the member > Timeout.
• The quarantine step uses the Quarantine role, and a member held this way is freed only by a moderator pressing Approve, not by answering the gate question. If the server has no Quarantine role, the step warns instead and the reply says to run /security verify.
• The kick step needs Kick Members and a role above the member's. If Reina cannot, it warns instead and the alert says why.
• The warning is posted in the channel, pings only that member, and deletes itself after 5 minutes. Reina never sends a direct message.
• Staff are never struck. A dry run counts no strike. When a moderator lets a member in (Approve), their strikes start again from 0.

Nothing changes until you press Build on the last step. Then Reina takes a backup, sets up security exactly like /security setup, and makes the channels, roles, rules post, welcome screen and theme you picked. It makes only what is missing, so running it again makes nothing twice.

Slash command, in a server. Discord shows it as: Set up your server step by step: security, channels, roles, theme and rules

How to

1. In any channel type /setup and press Enter. Only you see the message, and only you can press its buttons.
2. Step 1, Welcome: read the counts and whether Community is on. If Reina is missing a permission, the step names it: turn it on at Server Settings > Roles > Reina, run /setup again, then press Next.
3. Step 2, Security: use the three menus to pick the alert layout, the guide channels and the trap channel, then press Next. Security is always set up; the menus only pick how. A line under the menus says members who never answer the gate question wait for a moderator, and that to kick them after a set time you run /security verify kick_after: after Build.
4. Step 3, Preset: pick Gaming, Art, Study, Streamer, Friends or Support, or None to keep your channels as they are. Read the tree under the menu, then press Next. Press Skip to pick None.
5. Step 4, Roles: pick whether to make the four-role ladder, and whether the top role counts as a moderator role for Reina's buttons, or None. Press Next, or Skip.
6. Step 5, Theme: pick Plain, Emoji or Cute, or None to leave every name as it is. The step shows the preset's new names before and after, then lists every existing channel, category and role the theme would rename or recolor in tick menus (25 to a menu; use Previous page and Next page for more). Only the ones a design made start ticked, and the others start unticked: tick any you want changed. Build leaves unticked ones as they are. Press Next, or Skip.
7. Step 6, Rules and welcome screen: tick Post the rules in #rules, Replace the welcome screen, both, or neither. What is already yours starts unticked: a #rules you made, or a welcome screen you set. The welcome screen needs Community: Server Settings > Enable Community > Get Started. If members can post in a rules, announcements or welcome channel that was there before Reina, a menu also offers Make them read-only; the default is to leave their permissions as they are. Press Next, or Skip (Skip leaves them as they are).
8. Step 7, Summary: read what Build will do and the tree of channels and roles, then press the green Build button. Use Back at any step to change a pick.
9. Reina shows its progress, then says what it made and how to undo it.
10. Stopped halfway? Run /setup again within 24 hours and press Continue to pick up at the step you stopped on, or Start over.

Example: /setup

Good to know

• Skip picks None for that step. None on every optional step (3 to 6) sets up security only, the same as /security setup.
• Reina changes nothing on your existing channels unless you pick it. The read-only offer on step 6 appears only when members can post in a rules, announcements or welcome channel you had before. If you pick it, Build makes those channels read-only for members (moderators and Reina can still post), and /security undo puts them back.
• A menu you do not touch keeps its first choice: no preset, the roles made with the top one counted as a moderator role, and no theme. Pick None on step 4 if you do not want the roles.
• The roles and the theme also need Manage Channels and Manage Roles of your own. Without them, Build makes the rest, skips those two and says so.
• Reina takes a backup before it changes anything. If the backup fails, Reina changes nothing and says so.
• Reina makes only what is missing. A channel or role you already have, even one with a different capital letter or an emoji in its name, is listed as already there and left as it is.
• The roles have no permissions, and Reina never gives them to anyone: hand them out yourself at Server Settings > Members.
• If the plan would pass one of Discord's limits (500 channels, 250 roles, 50 channels in one category), the Summary says what to delete and Build stays off.
• Buttons stop working after 14 minutes with no press, and nothing has changed. Run /setup again to pick up where you left off.
• Undo for 7 days: /security undo takes back the security part, and /design undo takes back the design part.
• You can rename anything Reina made, and Reina still knows what it is, because it remembers ids, not names. Two things to know: Reina gives the trap channel a new name every day on purpose, and /design undo leaves a name or color alone if you changed it since.

Reina first shows a tree of what it will make, with already there beside what you have, and two ticks: Post the rules in #rules and Replace the welcome screen. On Confirm it takes a backup, makes only what is missing, and does what is ticked. What is already yours starts unticked, so an existing #rules or welcome screen is never changed unless you tick it. Confirm is offered even when every channel already exists, as long as the rules are not pinned yet or the welcome screen does not show the preset's welcome.

Slash command, in a server. Discord shows it as: Add a ready-made set of channels and roles; only what is missing is made

How to

1. In any channel type /design and pick preset from the list.
2. In preset pick Gaming, Art, Study, Streamer, Friends or Support. Optional: in theme pick Plain, Emoji or Cute for the new names. Left out, new names use the server's current theme, which is Plain at first. Press Enter.
3. Read the preview. In the menu under it, tick or untick Post the rules in #rules and Replace the welcome screen. Post the rules starts ticked only when Reina makes #rules; Replace the welcome screen starts unticked when a welcome screen you set is on.
4. Press Confirm within 5 minutes. Only you can press it.
5. Reina reports its progress, then says what it made, what was already there, and how to undo it.

Example: /design preset preset:Gaming theme:Emoji

Good to know

• Nothing that already exists is renamed, moved or deleted, and an existing #rules or welcome screen is changed only when you tick it. To restyle existing names, run /design theme.
• The welcome screen needs Community: Server Settings > Enable Community > Get Started. Without it, Reina skips the welcome screen and says so.
• If everything in the preset is already here, the preview says so and Confirm only posts the rules or sets the welcome screen. If there is nothing at all left to do, Reina says so and changes nothing. If the preset would pass one of Discord's limits (500 channels, 250 roles, 50 channels in one category), it changes nothing and says what to delete.
• A channel or role a design made and you renamed is still recognized, so a second /design preset does not make it again.
• The four roles have no permissions, and Reina never gives them to anyone. They do not become moderator roles for Reina's buttons here; /setup asks about that, or run /security mods.
• You can rename anything Reina made, and Reina still knows what it is, because it remembers ids, not names. Two things to know: Reina gives the trap channel a new name every day on purpose, and /design undo leaves a name or color alone if you changed it since.

Reina lists every name it would change, before and after, as a tick list: all ticked at first, 25 to a menu, with Previous page and Next page when there are many. Untick any you want to keep. On Confirm it takes a backup and renames the ticked text channels, voice channels and categories, and renames and recolors the ticked ones among the four ladder roles that a design made. Roles you made yourself are never touched. The theme you pick is also used for new names from then on.

Slash command, in a server. Discord shows it as: Restyle channel and category names, and the names and colors of the roles a design made

How to

1. In any channel type /design and pick theme from the list.
2. In theme pick Plain, Emoji or Cute, then press Enter.
3. Read the before and after names in the menus under the message. Untick any you want to keep as they are, and use Previous page and Next page if there are more than one page. Then press Confirm within 5 minutes. Only you can press it.
4. Reina says how many it restyled, and how to undo it.

Example: /design theme theme:Cute

Good to know

• Text channel names become lowercase with dashes, as Discord requires. A voice channel keeps its capital letters and spaces but loses any emoji.
• A channel you renamed by hand is on the list too, because the theme changes every name; untick it to keep your name. If you untick everything and press Confirm, Reina changes nothing and takes no backup. /design undo puts the old names back for 7 days.
• Reina leaves its own security channels and roles and your moderator roles alone, and says how many. To change one, do it by hand: right-click a channel > Edit Channel, or Server Settings > Roles.
• Roles at or above your own highest role are left out of the list, and Reina says how many; the server owner sees them all.
• If every name already looks like that theme, Reina says so and changes nothing.
• You can rename anything Reina made, and Reina still knows what it is, because it remembers ids, not names. Two things to know: Reina gives the trap channel a new name every day on purpose, and /design undo leaves a name or color alone if you changed it since.

Nothing changes until you press Confirm on the last step, and Reina takes a backup first.

Slash command, in a server. Discord shows it as: Pick a design from the catalog: see it first, choose its parts and font, then build it

How to

1. In any channel type /design and pick pick from the list, then press Enter. Only you see the message that opens, and only you can press its buttons.
2. Step 1: pick a theme, one of its templates and a size (Small or Big, with the channel count). Press Next.
3. Step 2: tick the parts you want, pick the letters for names and the Style of the posters, server icon and banner, and read the tree of channels. If your server already has channels of its own, a last menu says what happens to them. Press Next.
4. Step 3: read the list of what will change. Untick any channel you do not want. Press Confirm within 14 minutes. The Confirm button is red when it deletes channels.
5. Reina reports its progress, then says what it made, what was already there, any name Discord changed, and how to undo it with /design undo.

Example: /design pick

Good to know

• The parts are listed in the topic Designs: what each part means. The letters menu starts with the fonts made for the theme, then the fonts of other themes, and ends with Plain letters.
• Add beside mine (the first mode): Reina makes only what your server lacks, matched by kind and plain name, so a #general you already have is not made again, and the preview lists the ones that are already there. Nothing of yours is renamed, moved or deleted.
• Restyle mine only: no new channels. Your own text channels, voice channels and categories get this design's look around their own plain names, and the preview lists every name before and after. No role is ever renamed or recolored in this mode. Needs Manage Channels and Manage Roles for you.
• Replace my channels: only the server owner sees it, and its Confirm is red. Reina deletes every channel and category of yours that step 3 lists (never its own security channels, the channels Community needs, the system messages and AFK channels, the channel you ran /design pick in, or a category that still holds one of those) and then builds the design. The messages in the deleted channels are gone for good, and invite links to them stop working: make new ones afterward (right-click a channel > Invite People). If your own rules channel or welcome screen channels are among the deleted ones, step 3 ticks the rules post and welcome screen again and says so. Only the server owner can take a Replace back with /design undo, which makes the channels again with their names, topics, places and permissions, but empty, and puts them back on your welcome screen.
• The staff roles have no powers and Reina never gives them to anyone: hand them out yourself at Server Settings > Members. This command does not make the roles members pick for themselves (colors, pronouns, pings): /design roles makes them and posts the buttons, a dropdown or reactions under the roles poster.
• Some themes have age-restricted channels, such as the Anime Waifu Lounge. Reina makes them age-restricted, and the rules post then ends with a line for adults.
• Discord can change a name as it makes the channel, for example by dropping a character it does not allow. Reina lists every name it changed. To pick another name: right-click the channel > Edit Channel.
• The welcome screen needs Community: Server Settings > Enable Community > Get Started. Without it, Reina skips the welcome screen and says so.
• If the design would pass one of Discord's limits (500 channels, 250 roles, 50 channels in one category), Reina changes nothing and says what to delete.
• The posters, server icon and banner come as a matched set in the Style you picked. The banner needs Boost level 2: without it, Reina skips the banner and says to run /design banner later. A picture that is not ready for that style is skipped with a line naming the command that sets one that is. To change any one of them afterward, to any theme and style, run /design posters, /design icon or /design banner.
• If the message says this part of Reina Bot is not open in your server yet, it is still being tested in a few servers: ask for it with /feedback.
• You can rename anything Reina made, and Reina still knows what it is, because it remembers ids, not names. Two things to know: Reina gives the trap channel a new name every day on purpose, and /design undo leaves a name or color alone if you changed it since.

Emoji, separators and dividers stay as they are. Reina lists every name it would change, before and after, as a tick list, and changes nothing until you press Confirm.

Slash command, in a server. Discord shows it as: Put plain letters back in channel and category names; emoji and dividers stay

How to

1. In any channel type /design and pick plain from the list, then press Enter.
2. Read the before and after names in the menus under the message. Untick any you want to keep as they are, and use Previous page and Next page if there is more than one page.
3. Press Confirm within 5 minutes. Only you can press it. Reina takes a backup first.
4. Reina says how many it changed, and how to undo it.

Example: /design plain

Good to know

• You can run it any time, not only after /design pick. Dividers (the channels made only of lines) are never listed. A voice channel keeps its capital letters and spaces.
• If a catalog design is set, its letters are plain from then on, so a later /design pick starts from that. /design undo puts the fancy letters back.
• Reina leaves its own security channels alone, and says how many. To change one, do it by hand: right-click a channel > Edit Channel.
• If every name already uses plain letters, Reina says so and changes nothing. If you untick everything and press Confirm, Reina changes nothing and takes no backup.
• If the message says this part of Reina Bot is not open in your server yet, it is still being tested in a few servers: ask for it with /feedback.

Reina shows the picture first and sets it only when you press Confirm. It takes a backup first, and /design undo puts the banner from before back. Banners are free for every server.

Slash command, in a server. Discord shows it as: Set one of the free server banners of a theme (needs Boost level 2)

How to

1. In any channel type /design and pick banner from the list.
2. In choice pick Option 1, Option 2, Option 3, Cute style, Cute style, pastel pink, or Dark and edgy. Optional: in theme pick the theme. Left out, it is the theme of your last /design pick. Press Enter.
3. Look at the picture in the preview. Press Confirm within 5 minutes. Only you can press it.
4. Reina says the banner is set. To see it: Server Settings > Overview > Server Banner Background.
5. Channel posters already up stay as they are. For posters in the new banner's style, run /design posters with the same theme and choice.

Example: /design banner choice:Option 1 theme:Cute / Kawaii

Good to know

• Take off the banner I set, in choice, removes the banner only if Reina set the one that is there now. If someone changed it since, Reina leaves it alone and says how to change it by hand: Server Settings > Overview > Server Banner Background.
• Without Boost level 2, Reina changes nothing and says so. Server Settings > Boost Status shows your level. Once it is there, run /design banner again.
• Some banners are not on every copy of Reina Bot yet. If the one you pick is missing, Reina names the ones that are ready for that theme. To ask for the missing one, use /feedback.
• /design undo puts the banner from before back. If the banner from before is no longer in Reina's backups, Reina says how to set it by hand.
• If the message says this part of Reina Bot is not open in your server yet, it is still being tested in a few servers: ask for it with /feedback.

Each theme has six, one for each banner: Option 1, Option 2, Option 3, Cute style, Cute style, pastel pink, and Dark and edgy. Mix freely: the icon can come from another theme than your design. Reina shows the picture first and sets it only when you press Confirm. It takes a backup first, and /design undo puts the icon from before back.

Slash command, in a server. Discord shows it as: Set one of the free server icons of a theme

How to

1. In any channel type /design and pick icon from the list.
2. In choice pick Option 1, Option 2, Option 3, Cute style, Cute style, pastel pink, or Dark and edgy. Optional: in theme pick the theme. Left out, it is the theme of your last /design pick. Press Enter.
3. Look at the picture in the preview. Press Confirm within 5 minutes. Only you can press it.
4. Reina says the icon is set. To see it: Server Settings > Overview.

Example: /design icon choice:Dark and edgy theme:Cute / Kawaii

Good to know

• Take off the icon I set, in choice, removes the icon only if Reina set the one that is there now. If someone changed it since, Reina leaves it alone and says how to change it by hand: Server Settings > Overview.
• Some icons are not on every copy of Reina Bot yet. If the one you pick is missing, Reina names the ones that are ready for that theme. To ask for the missing one, use /feedback.
• /design undo puts the icon from before back, even days later. If the icon from before is no longer in Reina's backups, Reina says how to set it by hand.
• If the message says this part of Reina Bot is not open in your server yet, it is still being tested in a few servers: ask for it with /feedback.

Mix freely: the posters can come from another theme than your design or your icon. Reina shows the first poster and the channels first and changes nothing until you press Confirm. It takes a backup first, and /design undo puts the old posters back.

Slash command, in a server. Discord shows it as: Put up the channel posters of a theme in one style, in place of the ones I put up before

How to

1. In any channel type /design and pick posters from the list.
2. In choice pick Option 1, Option 2, Option 3, Cute style, Cute style, pastel pink, or Dark and edgy. Optional: in theme pick the theme. Left out, it is the theme of your last /design pick. Press Enter.
3. Look at the first poster and the channels named in the preview. Press Confirm within 5 minutes. Only you can press it.
4. Reina says how many posters it put up and how many old ones it took down.

Example: /design posters choice:Cute style theme:Cute / Kawaii

Good to know

• Like /design pick, this command puts posters in the welcome, rules, roles and announcements channels you made yourself too. Your own messages there stay as they are.
• If someone deleted one of Reina's posters by hand, Reina knows: the next /design posters puts one up there again, and it is not counted among the old ones taken down or brought back by /design undo.
• If your server has none of the welcome, rules, roles or announcements channels, Reina changes nothing and says so. Make one (or run /design pick), then run /design posters again.
• If a poster could not go up in a channel, Reina says which one and what permission it needs there: Edit Channel > Permissions > Reina.
• If the message says this part of Reina Bot is not open in your server yet, it is still being tested in a few servers: ask for it with /feedback.

Slash command, in a server. Discord shows it as: Check role colors and names for readability on dark and light themes

How to

1. In any channel type /design and pick check from the list.
2. Read the report. Each line names a role or channel, says what is wrong, and ends with the fix.
3. To let Reina make the fixes it can, press Confirm within 5 minutes. Only you can press it. Reina takes a backup first, and fixes only what the report listed.
4. Changed your mind? Type /design undo within 7 days.

Example: /design check

Good to know

• Role colors need a contrast of at least 3 to 1 against Discord's dark theme (#313338) and its light theme (#FFFFFF). The report says which theme a color fails on, and the fix keeps the color's hue and changes only how light or dark it is, so a gray stays a gray and a blue stays a blue. A role with no color is skipped. A role colored #5865F2 reads well on the light theme but not on the dark one.
• Names are flagged when they use box lines, circles or other decorative symbols, fullwidth or fancy-font letters, invisible characters, more than one emoji, or an emoji that is not at the start. Screen readers read those out loud one by one. An emoji built from several joined together (a family, a person running) counts as one. The fix for a text channel is a plain lowercase name; for other names it removes the symbols, and small capital letters become plain ones.
• After a design from /design pick, fancy letters, emoji, frames, dividers and box lines in the channels and categories that design made are its style, so they are not listed, and the report says so. Names Reina did not make are still checked. To put plain letters back in any of them, run /design plain.
• A name with no automatic fix, or whose fix would change nothing, is listed with how to rename it by hand: right-click it > Edit Channel, or Server Settings > Roles.
• Reina skips roles that belong to a bot. It leaves its own security channels and roles, your moderator roles and roles above its own as they are, and says how many, so you can change them by hand. Roles at or above your own highest role are left for someone higher up or the server owner, and Reina says how many.

Reina posts the panel as buttons, a dropdown or reactions, in the channel you choose (your roles channel to start). Reina shows what it will make and post first, and changes nothing until you press Confirm. /design undo takes the panel back for 7 days. A panel takes no backup: it posts one message, and any role it makes has no powers. Free for every server.

Slash command, in a server. Discord shows it as: Roles members pick for themselves (colors, pronouns, pings) as buttons, a dropdown or reactions

How to

1. In any channel type /design and pick roles from the list, then press Enter. Only you see the message that opens, and only you can press its buttons.
2. Step 1, Which roles: pick a group from your design (Colors, Pronouns, Pings or another the design has) or Roles I already have, and the channel where the panel goes. To change a panel Reina made earlier, pick it under Edit or remove a panel I made. Press Next.
3. Step 2, How it works: pick the style (Buttons, Dropdown or Reactions), what a press does (Pick any, Pick one, Up to 2, 3 or 5, Add only, Remove only), how long members keep the role, and, if you want, the role a member needs to use the panel. Edit names and emoji changes the title and each role's name and emoji (a standard emoji, or one of this server's own custom emoji). The first choices fit most servers: press Next to keep them.
4. Step 3, Check and confirm: read what Reina will make, where the panel goes and which roles were left out and why. Press Confirm within 14 minutes. Reina makes any missing roles with no powers and posts the panel.
5. Try it: press a button on the panel. Reina answers privately and the role is on you. Press it again to take it off.

Example: /design roles

Good to know

• Free for every server: every style, every mode, timed roles and many panels. One panel offers up to 25 roles as buttons, 125 as a dropdown or 20 as reactions, and a server can have up to 100 panels. Discord allows 250 roles in a server in all. If you pass a limit, Reina says so and nothing is posted: pick another style or split the roles over two panels.
• One run makes one panel: one group from your design, or up to 25 roles you already have. For the next group, run /design roles again. The ready-made groups come from your last /design pick; without one, Reina says to run /design pick first, and you can still pick roles you already have.
• The roles Reina makes for a group have no powers. A role is judged only by what it gives beyond what @everyone already has (in the server, and in each channel). Roles that give a moderation permission (Administrator, any Manage permission, Kick, Ban, Timeout, Move, Mute or Deafen Members, Mention @everyone, View Audit Log or Bypass Slowmode), moderator roles, the Quarantine role, roles that belong to a bot, @everyone and roles above Reina's own are never offered, and step 3 says why each one was left out, naming the exact permissions and how to turn them off. A role that gives smaller extras (Create Expressions, Create Events, Pin Messages, Priority Speaker, View Server Insights, View Creator Monetization Analytics or Use External Apps) is offered with a heads-up on step 3 and in the reply. A role with the same name as one of the design's that Reina may not hand out is left out, never made a second time. Reina checks the live role again at every press, so a role that gains a moderation permission later is refused with the next step, and the permission watch names it in your alert channel.
• Reina Bot asks for the narrowest permission: Manage Roles, and Add Reactions and Manage Messages in the panel's channel only for the reactions style (Reina takes a refused or replaced reaction off). The invite link's permissions do not change. When something is missing, Reina says what and how to fix it: Server Settings > Roles > Reina for Manage Roles, or Edit Channel > Permissions > Reina for the channel permissions. If you would rather not give it, set the roles by hand: right-click the member > Roles.
• In the roles channel a design makes, members cannot post, but they can still press the buttons, use the dropdown and add reactions there, so the panel works. If you made the channel yourself, check that members can read it and add reactions: Edit Channel > Permissions > @everyone.
• Members can always take their own pick off, even on a panel that is only for members with a role, except on an Add only panel: it never takes a role back, and Reina's reply tells the member where to do it (a Remove only panel for the same roles, or a moderator). Pick one panels add a None choice. Reina never takes the Quarantine role or a moderator role off through a panel or a time limit. If the role a panel is only for is deleted, editing the panel takes that limit off, and Reina says so.
• Reina keeps no list of who picked what and never sends a member a direct message. It stores only the panel, its channel and message, and the role ids. Discord itself shows who has a role, and Reina's server backups copy every member's roles as they are (not who pressed what). A role with a time limit also stores your user id, the role id and when it ends, until it ends, you leave the server, a moderator uses /security forget on you, or you use /privacy. If you leave while Reina is offline, the row stays until the time would have ended.
• Rename the roles or the panel's channel any time: Reina keeps track by id. If someone deletes the panel message by hand, Reina forgets that panel. If the message was deleted while Reina was offline, it still shows under Edit or remove a panel I made, and Confirm posts it again.
• /design undo takes back the roles Reina made (a role someone holds is kept) and the panel message, or puts a removed panel back. If Reina says the pick-your-own roles part did not start, tell the people who run Reina Bot with /feedback: security is not affected.
• If the message says this part of Reina Bot is not open in your server yet, it is still being tested in a few servers: ask for it with /feedback.

Reina edits its post and keeps your wording, so /security reports, /security verify, /security trap, /setup, /design preset and /backup restore use it from then on instead of Reina's.

Message menu, in a server.

How to

1. Right-click Reina's pinned post (press and hold on mobile).
2. Pick Apps, then Edit this text. A box opens with the post's current text.
3. Type your wording (up to 2000 characters) and press Submit. Reina changes the post and says so. Only you see the reply.
4. Changed your mind? Press Use the default text under the reply within 5 minutes. Later, open the box again, empty it and press Submit.

Example: Right-click the pinned post in #report-scams > Apps > Edit this text

Good to know

• Type the new wording yourself. Asking Reina to rewrite it for you is not available yet.
• The trap channel warning always starts with the bold line DO NOT POST IN THIS CHANNEL. Anyone who posts there is held, so if your text leaves that line out, Reina puts it back at the top and says so.
• The gate post always shows the gate question. Your wording keeps the question in the same place when you change it with /security verify; if your text leaves the question out, Reina adds it at the end and says so.
• Only Reina's pinned server posts can be changed. Alerts and Reina's replies are records and stay as they are, and Reina refuses anyone else's post, saying what it can change.
• Channel topics you change yourself: Edit Channel > Overview > Channel Topic.
• If you changed the rules post, /design undo leaves it in place.

Reina first lists what it will delete and how many names, colors, posts or welcome screens it will put back, then waits for your Confirm. A red Confirm button means it deletes channels or roles.

Slash command, in a server. Discord shows it as: Take back the newest design change (within 7 days)

How to

1. In any channel type /design and pick undo from the list.
2. Read the preview. It lists what it deletes, what it keeps because it was renamed or is in use, and how many names, colors, posts or welcome screens it puts back. Discord cannot bring a deleted channel or role back.
3. Press Confirm within 5 minutes. Only you can press it.
4. Reina says how many it took back. For the change before that one, type /design undo again.

Example: /design undo

Good to know

• Reina keeps up to 10 design changes, for 7 days each. If nothing is left, it says so.
• The security part of /setup is taken back by /security undo, not here.
• A name or color you changed yourself since is left alone, and Reina says how many. A channel or role a design made is kept, not deleted, if it was renamed; a channel is also kept if anyone but Reina posted in it, a role if anyone has it, and a category if it still holds a kept channel. Kept ones are listed in the preview and the result, and dropped from the design change.
• After Replace my channels in /design pick, the preview also says it makes again the channels the design deleted, with their names, topics, places and permissions. They come back empty: their messages are gone for good.
• After /design banner, undo puts the banner from before back, or takes the banner off when there was none. If someone changed the banner since, Reina leaves it alone and says how to change it by hand: Server Settings > Overview > Server Banner Background.
• After /design roles, undo takes a panel it posted down, puts back a panel you removed or changes, and deletes the roles it made unless someone has them (those are kept). A panel message that is already gone is fine: Reina carries on.
• Kept too: a channel or role that has become one of Reina's security channels or a moderator role since, and a channel holding a post whose wording you set with Apps > Edit this text (the default text does not count).
• Undo also puts back the theme and preset the server had before that change.
• If part of an undo fails, that part stays as the newest change, so /design undo can try it again. If it fails a second time, Reina stops trying, leaves it as it is and says how to fix it by hand: for the welcome screen, turn Community back on at Server Settings > Enable Community; for a role, drag Reina's role above it at Server Settings > Roles.
• While a /setup Build is running, /design undo says so: run it again in a minute. Confirm takes back only what the preview listed.

You can make one by hand at most once every 10 minutes, and Reina keeps your newest 3 apart from its own, so nothing Reina does ever pushes them out.

Slash command, in a server. Discord shows it as: Back up channels, roles, emojis, stickers and who has which role now (Reina does it every 6 hours)

How to

1. In any channel type /backup and pick now, then press Enter.
2. Reina says what it saved and how many backups made with /backup now it keeps.

Example: /backup now

Good to know

• No automatic backup is taken during a lockdown.

On Confirm it makes deleted roles, channels (with their permissions), emojis and stickers again, puts channels back in their category, and gives members back roles that were deleted. It never deletes anything. Messages cannot come back.

Slash command, in a server. Discord shows it as: Put back deleted channels, roles, emojis and member roles from a backup; nothing is ever deleted

How to

1. In any channel type /backup and pick restore, then press Enter.
2. Pick a backup from one of the three lists (automatic, made by a moderator, or made by Reina right before a change) and read the preview.
3. Press Confirm. Only you can press it.
4. Afterwards drag the Reina role back above your moderator roles if the order changed: Server Settings > Roles.

Example: /backup restore

Good to know

• It never hands back moderator powers on its own: roles it makes again come without Manage permissions, Administrator, Ban, Kick and Timeout, and a line lists what you may want to turn on by hand.
• Running it twice makes nothing twice.

You can attach a screenshot, for example of a scam DM they sent you.

Slash command, in a server. Discord shows it as: Report a scammer or spammer to the moderators, privately

How to

1. In any channel of the server type /report and press Enter.
2. In user pick the member. Or paste a link to their message in message_link: right-click the message (press and hold on mobile) > Copy Message Link.
3. Optional: in screenshot attach a picture.
4. Press Enter. Only you see Reina's reply.

Example: /report user:@Scammer

Message menu, in a server.

How to

1. Right-click the message (press and hold on mobile).
2. Pick Apps, then Report to Reina.
3. Only you see Reina's reply.

Example: Right-click a message > Apps > Report to Reina

How to, in a direct message with Reina.

How to

1. In the direct message, hover the scam message (press and hold on mobile) > Forward.
2. Pick Reina and send it.
3. If you share several servers with Reina, pick the server. Reina then asks who sent it.
4. Press Who sent it?, type their username or display name, and pick them from the matches.
5. Reina confirms in the same chat. Nothing is posted anywhere public.

Example: Hover the message in the DM > Forward > Reina

Good to know

• If Reina cannot find the sender, use /report in the server instead.

The moderators are told, with your name on the alert.

Slash command, in a server. Discord shows it as: Vouch for a newcomer you trust, so their first links and files are not held for review

How to

1. In any channel of the server type /vouch and press Enter.
2. In member pick the newcomer, then press Enter.

Example: /vouch member:@MyFriend

Good to know

• A vouch stops counting if you are later kicked, banned, held or contained.
• Members cannot see /security, so this command is top level.

With delete set to True it deletes all of it, in every server, right away and says how many records it removed. Only you see the reply.

Slash command, in a server or in a direct message with Reina. Discord shows it as: See what Reina keeps about you across servers, and delete it

How to

1. In any server where Reina is, or in a direct message with Reina (click Reina's name > Message), type /privacy and press Enter.
2. Read the list. Each server shows the join records, log lines, report records and so on that Reina keeps about you there. Nothing is shown if Reina keeps nothing.
3. To delete, type /privacy again, set delete to True, and press Enter.

Example: /privacy delete:True

Good to know

• Deleting never undoes a ban, a kick or a role. Roles Reina took can only be given back by hand by that server's moderators: Server Settings > Members. To appeal a ban, ask that server's moderators.
• If you are in quarantine when you delete, the Quarantine role stays on you until a moderator presses Approve. Reina tells you which servers, and the moderators there get one alert saying you asked to delete your records, and they decide.
• Buttons you pressed as a moderator stay in the log without your name, so those decisions still count.
• If you were on a server's anti-nuke trusted list, you are taken off it and that server is told.
• You can delete once a minute.

It arrives as a private message to the bot's owner, with your name, your user id and the server's name and id (or a note that it came from a direct message). Nothing is saved in Reina's database.

Slash command, in a server or in a direct message with Reina. Discord shows it as: Send a note to the people who run Reina Bot (not to this server's moderators)

How to

1. In any server where Reina is, or in a direct message with Reina, type /feedback and press Enter.
2. Type your note in the box (up to 1000 characters) and press Submit.
3. Reina thanks you in the same chat. If it could not deliver the note, it says so and tells you to try again in a few minutes.

Example: /feedback

Good to know

• This does not go to your server's moderators. If your note is about this server's moderation, message a moderator instead.
• An empty note is not sent. After 3 notes in a day Reina tells you when you can send the next one.